emmi E20 Ultrasound prosthetics set

The emmi^®-E20 with a tub capacity of 2.0L convinces with its stabil Stainless steel oscillating tank and Stainless steel case. It is a reliable ultrasonic cleaning device for dental, household, laboratory, ophthalmic optics, nail/tattoo/cosmetic studio, workshop and industry. In the household, glasses and small parts can also be cleaned gently and effectiv in the ultrasonic bath. Hearing aids, dentures, gun parts, jewelry, engine parts, carburetors and many other plastic/glass and stainless steel parts are thoroughly cleaned in the ultrasonic cleaner.

The sweep-technology ensures that the best working frequency is always generated, even with changing loads due to load, level, temperature and liquid. This creates a particularly homogeneous, uniformly, uniformly effective ultrasonic field in the entire ultrasonic bath.

The emmi^®-E20 also has a timer (1-30 Min./continuous operation) snd a heater (30-80°C). Due to the power control (40% / 60% / 80% / 100%) completes the full range of equipment for thorough and efficient cleaning with ultrasound.

In our online store you will find many other cleaning concentrates for every use, such as for Surgical instruments, weapon parts + accessories, glass, ceramics, metals, blanks, instruments, carburetors and much more!

 - Click here! to go to the other concentrates.

In addition, all our ultrasound devices are "Made in Germany"!

Dimensions:

- Unit-Outside (L x W x H): 260 x 150 x 220 mm
- Tub-Internal (L x W x H): 240 x 140 x 65 mm
- Basket-Internal (L x W x H): 230 x 130 x 50 mmBasket mesh size (∅): 6 mm

Content:

- Tub capacity: 2.0 liters
- Working capacity: 1.65 liters

Equipment:

- Oscillating tank: Stainless steel 1.4301
- Housing: stainless steel 1.4301
- Degree of protection: IP 32
- Drain cock: No
- Timer: 1-30 min / continuous operation
- Heating: 30-80 °C
- Power regulation: 40% / 60% / 80% / 100%
- Sweep technology: Yes (increase of normal ultrasonic power for particularly heavy soiling)

Technical data:

- Oscillating system: 2 PZT wide-beam oscillating system
- HF generator: overload-proof, power constant
- Operating mode: single half-wave
- Operating frequency: approx. 37 kHz
- Ultrasonic power: max. 160 Watt
- Heating power: 100 Watt
- Mains voltage: 50 / 60 Hz
- Mains connection: 220 - 240 VWeight: 3kg

- Subject to technical changes! -

Attention!!!

Do not use flammable chemicals, acids, substances containing chloride ions and household cleaners. Do not place cleaning materials on the bottom of the tank.

- The General Terms and Conditions of EMAG AG apply without modification. -